Custom Stepped Optical Lenses: How the Lens Edge Fits the Assembly
A lens drawing defines both the optical surfaces and the geometry that mates with the housing. In this Realpoo Optics feature, the lens shown has a stepped outer profile with a raised rim and a wider annular shoulder. Features like these can help locate the lens in a housing and establish where it seats during assembly.
What Does the Step Do?
In a typical assembly, one outer diameter can fit into a corresponding bore in the housing, while the shoulder can seat against a matching surface to set the lens depth. The drawing should identify which diameter locates the lens and which face serves as the seating surface. These are separate functions, and each can require its own tolerance.
What Should a Stepped Lens Drawing Specify?
Start with the dimensions that govern the fit: the outer diameters, step heights, and allowable variation at each mating surface. Then identify the clear aperture and how the optical axis should be centered relative to the locating diameter. If the lens requires a coating, indicate which optical surfaces need it and whether the seating surfaces must be kept clear.
The housing drawing or a cross section of the assembly can also help clarify the fit. A corner radius or relief in the housing, for example, may affect whether the lens shoulder seats fully.
If you are sourcing a custom stepped optical lens, send Realpoo Optics your lens drawing, material and coating requirements, and estimated order quantity. An assembly drawing is helpful when the lens must fit an existing housing.
Changchun Realpoo Photoelectric Co.,Ltd.